skip to Main Content

ENDMILL CHUCKS

For threaded shank End Mills and Slot Drills.

Interchangeable with Clarkson Autolock

TECHNICAL SPECIFICATIONS

  • Concentricity of outside taper of chuck with respect to bore of chuck within 0.005mm.
  • Case depth maintained within 0.8 to 1.0mm
  • Concentricity on test mandrel after clamping with threaded collet =0.02mm.
  • Taper matching = 90%
  • Inch and Metric Sizes
  • Inch and Metric Drawbars
  • SMALL CHUCK SETS – Part Nos: 3810
    Inch sets contain chuck and ¼”, 3/8″, ½” & 5/8″ collets and wrench
    Metric sets contain chuck & 6mm, 10mm, 12mm & 16mm collets and wrench
    Available with MT, ISO, R8 & BT shanks
  • LARGE CHUCK SETS-Part Nos.3820
  • Inch sets contain chuck, 1″ & 1 ¼” collets and wrench.
  • Metric sets contain chuck, 25mm & 32mm collets and wrench
  • Available with MT, ISO, R8 & BT shanks

CENTRES AND LOCKNUTS ARE ALSO AVAILABLE SEPARATELY

COLLETS FOR ENDMILL CHUCKS
For small chucks  Part Nos: 3813    ¼”, 3/8″, ½”, 5/8″ or 6mm, 10mm, 12mm, 16mm
For large chucks   Part Nos: 3823 ¾”, 1″, 1 1/4″ or 20mm, 25mm & 32mm

SKU: ENDE19 Category:
Back To Top