Standard Pole Type

• Suitable for holding medium and large components on grinding machines
• Used for light milling of large components
• Available from 125mm x 250mm up to 300mm x 1000mm
  

• Double magnet system for maximum power to generate twice the grip of standard pole chucks
• A powerful chuck for thin and thick components
• Can be used on grinding machines and for light milling operations
• Available in size 75mm x 150mm up to 200mm x 600mm
• Larger sizes on application

Neo-microfine Pole

• Extremely low height 45mm
• Variable power can be obtained by rotation of handle
• Sealed against fluid intrusion for use on EDM and wire cut operations
• Available in sizes 100mm x 150mm up to 200mm x 600mm
• Larger sizes on application

ROUND CHUCKS
Standard Pole Type

• Suitable for holding medium and large components on grinding machines
• Used for grinding medium & large components
• Available in diameters 130mm - 600mm

Double magnet Fine Pole

• Double magnet system for maximum power to generate twice the grip of standard pole chucks
• A powerful chuck for thin and thick components
• Available from 200mm -450mm diameter

Neo-microfine

• Extremely low height 45mm
• Variable power can be obtained by rotation of handle
• Sealed against fluid intrusion for use on EDM and wire cut operations
• Available in 100mm-200mm diameter
• Larger sizes available on application

Neo-radial

• Most suitable design for disc and circular components
• Extremely powerful for use on grinding and turning machines
• Variable power can be obtained by rotation of handle
• Top plate is machinable up to 8mm, can be fitted with pole extensions to hold shaped components
• Available from 100mm - 450mm
• Larger sizes available on application

ELECTRO-MAGNETIC CHUCKS (Sizes and prices on application)
Rectangular

• Rectangular chucks are available in standard , fine microfine and universal poles either long or cross pole design.

Round chucks

• Round chucks are available in concentric, radial and straight pole designs.

ELECTRO-PERMANENT MAGNETIC CHUCKS (Sizes and prices on application)
Rectangular & Radial Pole

• Magnetic power above 100 tonne/sqm allows very high metal removal rate
• Suitable for heavy duty milling and grinding
• Will not let go during power failure
• Unobstructed movement of cutters during machining allows machining on five sides of the job.
• Uniform clamping over entire area eliminates chattering of tool which gives improved finish and tool life.
• Clamping and unclamping time approximately 3 secs.

MAGNETIC CHUCK BLOCKS

• Available in rectangular & Vee Block patterns.